Post-yield characterisation of metals with significant pile-up through spherical indentations

Finite element simulations of spherical indentations accounting for frictional contact provide validated load–indentation output for assessing and improving existing methods used to determine the stress–strain curve of materials with significant pile-up. The importance of friction to the proper assessment of the pile-up effect is established. Weaknesses in current characterisation relations and procedures are also identified. Existing correction formulae accounting for pile-up are modified so that the contact area radius is more accurately determined. This modification is implemented in the context of a characterisation process that relies on analysing unloading portions of load–indentation curves. Post-yield material behaviour predictions from such analysis are found to be in very good agreement with the initial finite element material input

A general purpose wideband optical spatial frequency spectrum analyzer

The light scattered at various angles by a transparent media is studied. An example of these applications is the optical Fourier spectrum measurement resulting from various spatial frequencies which were recorded on a photographic emulsion. A method for obtaining these measurements consists of illuminating the test object with parallel monochromatic light. A stationary lens, placed in the resulting wavefield at a distance of one focal length from the object, will focus parallel waves emanating from the test object at a point lying in the focal plane of the lens. A light detector with a small filtering aperture is then used to measure the intensity variation of the light in the focal or transform plane of the lens. Such measurements require the use of a lens which is highly corrected for all of the common aberrations except chromatic aberration

Validation of a bovine rectal palpation simulator for training veterinary students

No abstract available

High-resolution 3D weld toe stress analysis and ACPD method for weld toe fatigue crack initiation

Weld toe fatigue crack initiation is highly dependent on the local weld toe stress-concentrating geometry including any inherent flaws. These flaws are responsible for premature fatigue crack initiation (FCI) and must be minimised to maximise the fatigue life of a welded joint. In this work, a data-rich methodology has been developed to capture the true weld toe geometry and resulting local weld toe stress-field and relate this to the FCI life of a steel arc-welded joint. To obtain FCI lives, interrupted fatigue test was performed on the welded joint monitored by a novel multi-probe array of alternating current potential drop (ACPD) probes across the weld toe. This setup enabled the FCI sites to be located and the FCI life to be determined and gave an indication of early fatigue crack propagation rates. To understand fully the local weld toe stress-field, high-resolution (5 mu m) 3D linear-elastic finite element (FE) models were generated from X-ray micro-computed tomography (mu-CT) of each weld toe after fatigue testing. From these models, approximately 202 stress concentration factors (SCFs) were computed for every 1 mm of weld toe. These two novel methodologies successfully link to provide an assessment of the weld quality and this is correlated with the fatigue performance

An experimental investigation of the hypergolic ignition of some polymeric fuels with oxygen

Hypergolic ignition of polymeric fuels with oxyge

Cauchy horizon singularity without mass inflation

A perturbed Reissner-Nordstr\"om-de Sitter solution is used to emphasize the nature of the singularity along the Cauchy horizon of a charged spherically symmetric black hole. For these solutions, conditions may prevail under which the mass function is bounded and yet the curvature scalar $R_{\alpha\beta\gamma\delta} R^{\alpha\beta\gamma\delta}$ diverges.Comment: typeset in RevTex, 13 page

Development of a new scale to measure ambiguity tolerance in veterinary students

The ability to cope with ambiguity and feelings of uncertainty is an essential element of professional practice. Research with physicians has identified that intolerance of ambiguity or uncertainty is linked to stress and some authors have hypothesised that there could be an association between intolerance of ambiguity and burnout (e.g. Cooke et al 2013). We describe the adaptation of the TAMSAD (Tolerance of Ambiguity in Medical Students and Doctors) scale for use with veterinary students. Exploratory factor analysis supports a unidimensional structure for the Ambiguity tolerance construct. Although internal reliability of the 29 item TAMSAD scale is reasonable (α = 0.50), an alternative 27 item scale (drawn from the original 41 items used to develop TAMSAD) shows higher internal reliability for veterinary students (α = 0.67). We conclude that there is good evidence to support the validity of this latter TAVS (Tolerance of Ambiguity in Veterinary students) scale to study ambiguity tolerance in veterinary students

A Dry Powder Material Delivery Device for Multiple Material Additive Manufacturing

This research is to develop a novel material delivery device for a next generation additive manufacturing system which is capable of directly manufacturing objects by depositing several materials layer by layer. The successful deposition of multiple material layers by using this novel dry powder printing technique reveals its great potential as a means of incorporating multiple materials in the traditional additive manufacturing process since this technology is suitable for a wide range of materials and it has the capability to manufacture 2D layers composed of multiple materials. This paper will outline the basics of the dry powder printing technology and present and discuss selected experimental studies from our research.Mechanical Engineerin